McIntosh C500C Instrukcja Właściciela Pobierz pdf (Strona 22)

Accessory Control

When the Trigger A or B Power Control Outputs on the

C500 Controller are used, one of the Triggers may be as-

signed to switched On or Off by using the ACCessory Push-

button on the supplied Remote Control. To select either

Trigger A or B for remote operation, perform the following

steps:

1. Press the SETUP Push-button twice to access the Setup

Preamp Mode unless the C500C is already in the Setup

Preamp Mode.

2. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “ACC CONTROL --”. Refer to figure

38.

3. Rotate the SELECT 2 Control until the desired Trigger

A or B appears in the Display, e.g. “ACC CONTROL

A”. Refer to figure 39.

Note: Devices connected to the Trigger (A or B) Jacks

will be effected when Trigger (A or B) in SETUP is

changed.

4. If no other adjustments are to be made at this time,

press the SETUP Push-button to exit the Setup Preamp

Mode or proceed to the next desired Setup Preamp

Mode for adjustment.

Figure 38

Figure 39

Trigger Selection

The Trigger A and B Power Control Outputs on the C500

Controller are reassignable from their default settings to ac-

tivate only when a given Input(s) is selected. To change ei-

ther Trigger A or B from the default setting perform the fol-

lowing steps:

Note: Power Control Cables coming from the components to

be controlled need to be connected to the correct

Trigger Jack on the Rear Panel of the C500C to

function.

1. Press the SETUP Push-button twice to access the Setup

Preamp Mode unless the C500C is already in the Setup

Preamp Mode.

2. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “TRIG TUN --” . Refer to figure 36.

3. Rotate the SELECT 1 Control until the desired Input

Title to be changed appears in the Display, e.g. “TRIG

DVD --” .

4. Rotate the SELECT 2 Control until the desired Trigger

A or B (in this example the DVD Input will activate the

Trigger A Jack) appears in the Display, e.g. “TRIG

DVD A”. Refer to figure 37.

Note: Additional Inputs may also be assigned in the

same manner to also activate Trigger A.

5. If no other adjustments are to be made at this time,

press the SETUP Push-button to exit the Setup Preamp

Mode or proceed to the next desired Setup Preamp

Mode for adjustment.

Figure 36

Figure 37

10. If no other adjustments are to be made at this time,

press the SETUP Push-button to exit the Setup Preamp

Mode or proceed to the next desired Setup Preamp

Mode for adjustment.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Komentarze do niniejszej Instrukcji

Brak uwag

McIntosh C500C Instrukcja Właściciela Strona 22

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Wzmacniacze audio McIntosh C500C